Fuji Xerox DocuCentre-V C2265 Administrator's Guide

Appendix
744
Appendix
16
3 When the call is connected, start speaking.
4 When the call is finished, place the receiver back in the cradle.
Important
z
Be sure that the receiver is placed properly in the cradle. Otherwise, the line remains "busy".
5 Select [Close].
On-hook Dialing
The following describes how to place a call with on-hook dialing. Adjust the line monitor
volume so that you can hear the sound clearly.
Reference
z
The volume of the line monitor can be changed in the System Administration mode. For more information on how to change the
volume, refer to "Line Monitor Volume" (P.152). By factory default, the volume is set to [Soft].
1 On the Services Home screen, select [Fax/ Internet Fax].
2 Select the [More Options] tab, and then select [On-hook (Manual Send/Receive)].
3 Specify the call destination.
z
The call destination can be specified using the numeric keypad, address numbers, or one-
touch buttons. The Address Book cannot be used.

Fuji Xerox DocuCentre-V C2265 Specifications

General

Functions	Print, Copy, Scan, Fax
Print Resolution	1200 x 2400 dpi
Scan Resolution	600 x 600 dpi
Monthly Duty Cycle	Up to 50, 000 pages
Duplex Printing	Yes
Memory	2 GB
Hard Disk Drive	160 GB
Print Technology	Laser
Copy Resolution	600 x 600 dpi
Scan Type	Color Scanner
Fax Transmission Speed	33.6 kbps
Max Paper Size	A3
Network Connectivity	Ethernet
Scan Speed	55 ppm (color) / 55 ppm (mono)
Connectivity	USB 2.0
Paper Size	A4, A5
Operating System Compatibility	Windows, Mac
Print Speed	Up to 25 ppm (color) / 25 ppm (mono)