z
WSD stands for Web Services on Devices.
z
The services displayed on the screen vary depending on the machine configuration.
z
When [Enable Accounting] is selected for a service, [ ] is displayed on the button of the applicable service
on the Services Home screen. Also, [ : Requires Login] is displayed at the lower left of the Services Home
screen. [ ] and [ : Requires Login] are not displayed after authentication.
z
Print jobs may be canceled depending on the settings in "Receive Control" (P.322).
Verify User Details
Allows you to set whether or not to verify user information.
Selecting [Yes] also allows you to select [For printer/Direct Fax Jobs].
Customize User Prompts
Allows you to set the type of user information used for authentication.
z
Account ID is used for accounting.
z
Display User ID & Account ID Prompts
Prompts users to enter both their user ID and Account ID.
z
Display User ID Prompt Only
Prompts users to enter their user ID only.
z
Display Account ID Prompt Only
Prompts users to enter their Account ID only.
z
Display No Prompts
Does not prompt users to enter their user ID or Account ID.
Accounting Login Screen Settings
You can configure Accounting settings.
Alternative Name for User ID
If required, you can change the indication "UserID" on the [Login] screen that appears
when the <Log In/Out> button on the control panel or the login information area on the
touch screen is pressed to another name such as "User Name" or "Number". The alias can be
set to 1 to 15 single-byte characters.
To Next Page
Loading...
Need help?
General
