Fuji Xerox DocuCentre-V C2265 Administrator's Guide

Tools
138
Tools
5
System Settings Procedure
To change or customize the system settings, enter the System Administration mode.
This section describes the basic procedures for system settings.
The following shows the reference section for each procedure.
"Step1 Entering System Administration Mode" (P.138)
"Step2 Entering the System Administrator User ID and Passcode" (P.138)
"Step3 Selecting [Tools]" (P.139)
"Step4 Selecting a Setting Item on the [Tools] Screen" (P.139)
"Step5 Setting a Feature" (P.142)
"Step 6 Exiting System Administration Mode" (P.142)
Step1 Entering System Administration Mode
1 Press the <Log In/Out> button or the login information field on the touch screen.
Step2 Entering the System Administrator User ID and Passcode
To enter the system administration mode, enter the system administrator's user ID. If
[Passcode Entry for Control Panel Login] is set to [On] under [Tools] > [Authentication/
Security Settings] > [Authentication] > [Passcode Policy], you need to enter the passcode.
We recommend that you change the system administrator's user ID and passcode
immediately after installing the machine.
Reference
z
For more information on how to change the passcode, refer to "System Administrator Settings" (P.313).
123
456
789
0
＃
C

Fuji Xerox DocuCentre-V C2265 Specifications

General

Functions	Print, Copy, Scan, Fax
Print Resolution	1200 x 2400 dpi
Scan Resolution	600 x 600 dpi
Monthly Duty Cycle	Up to 50, 000 pages
Duplex Printing	Yes
Memory	2 GB
Hard Disk Drive	160 GB
Print Technology	Laser
Copy Resolution	600 x 600 dpi
Scan Type	Color Scanner
Fax Transmission Speed	33.6 kbps
Max Paper Size	A3
Network Connectivity	Ethernet
Scan Speed	55 ppm (color) / 55 ppm (mono)
Connectivity	USB 2.0
Paper Size	A4, A5
Operating System Compatibility	Windows, Mac
Print Speed	Up to 25 ppm (color) / 25 ppm (mono)