Appendix
644
Appendix
16
z
Folding
*2
: 500 sheets
*1 : When larger size sheets are stacked on top of smaller size sheets.
*2 : The Booklet Finishing function requires the optional Finisher-B1 Booklet unit. After a job with the Booklet Finishing function
specified has been output, the next job may not be delivered until the sheets are removed from the output tray. Also, if larger
size sheets are stacked on top of smaller size sheets after a job with the Booklet Finishing function specified has been run, the
next job may not be delivered until the sheets are removed from the output tray.
z
When using 80 gsm paper
îš„ Staple
z
Capacity:
A4: 50 sheets (90 gsm or less)
z
Paper Size:
Maximum: A3, 11 X 17"
Minimum:B5
z
Position:
Single stapling or dual stapling
îš„ Punch
z
Paper Size:A3, 11 x 17", B4, A4, A4 , 8.5 x 11", 8.5 x 11" , B5
z
Number of Holes:2/4 holes, or 2/3 holes (US Specifications)
z
Paper Weight:60 to 200 gsm
z
The Punch function requires the optional Finisher-B1 Punch unit for 2-hole / 4-hole punch or Finisher-B1
Punch unit for 2-hole / 3-hole punch (US Specifications).
îš„ Booklet Finishing
z
Capacity:
Saddle Staple: 15 sheets; Scoring: 5 sheets
z
Paper Size:
Maximum: A3, 11 x 17"
Minimum: A4, 8.5 x 11"
z
Paper Weight
Saddle Staple : 64 to 80 gsm, Scoring : 64 to 105 gsm
z
The Booklet Finishing function requires the optional Finisher-B1 Booklet unit. After a job with the Booklet
Finishing function specified has been output, the next job may not be delivered until the sheets are removed
from the output tray. Also, if larger size sheets are stacked on top of smaller size sheets after a job with the
Booklet Finishing function specified has been run, the next job may not be delivered until the sheets are
removed from the output tray.
îš„ Dimensions/Weight
Width 657 x Depth 552 x Height 1,010 mm, 28 kg
Width 657 x Depth 597 x Height 1,080 mm, 37 kg (When the Booklet Maker Unit is
attached)
z
The values do not include the finisher transport area located within the main unit.