Common Service Settings
167
Tools
5
Check EP Connection
This feature is used to check whether or not the communications between the machine and
our Customer Support Center function normally when the EP system via the Internet is
used.
z
The EP system is not available in some region. For more information, contact our Customer Support Center.
z
For more information on the EP system, refer to "EP System" (P.749).
EP Registration
îš„ BB Registration
Select [BB Registration] and then select [Start] to register the machine in EP system.
îš„ EPA Server Registration
After the BB registration, [EPA Server Registration] is automatically selected in accordance
with your environment. When this feature is selected, enter the destination server IP of your
EPA server and then select [Start] to register the machine in the EPA server.
Initialize Hard Disk
Initializes the hard disk.
Data deleted by initialization includes supplementary fonts, ESC/P, and HP-GL/2 forms.
z
The secure print documents and logs are not erased.
Delete All Data
This feature is designed to prevent the leakage of confidential information of a customer
when the machine is returned to Fuji Xerox. All data stored on the machine will be deleted.
Before executing the operation, make sure that the operation is absolutely necessary.
z
It takes several minutes to several hours to delete all data. (The time taken depends on the machine
configuration or the hard disk capacity.)
Software Options
This feature is for service representative use. For more information, contact our Customer
Support Center.
To Next Page
Loading...
Need help?
General
