Fuji Xerox DocuCentre-V C2265 Administrator's Guide

Tools
234
Tools
5
LPD Print Queue
Set the LPD print sequence.
Note
z
If you change the [LPD Print Queue] setting, the [Receiving Buffer - LPD] setting may automatically be
changed. For more information on Receiving Buffer - LPD Spool, refer to "Receiving Buffer - LPD" (P.228).
 Data Processing Order
Prints jobs in the order of becoming print-ready status after receiving the jobs.
If you instruct the machine to print jobs of multiple documents continuously, the machine
may preferentially print a job which was sent later depending on the time for data
processing.
 Job Submission Order
Prints jobs in the order of lpr print submission.
Important
z
This setting is valid only when [Receiving Buffer - LPD] is set to [Spool to Hard Disk]. When any other setting,
printing is performed in [Data Processing Order].
OCR Font Glyphs (0 x 5C)
Allows you to select [Backslash] or [Japanese Yen Sign] to print 0x5C character when the
OCR fonts are used.

Fuji Xerox DocuCentre-V C2265 Specifications

General

Functions	Print, Copy, Scan, Fax
Print Resolution	1200 x 2400 dpi
Scan Resolution	600 x 600 dpi
Monthly Duty Cycle	Up to 50, 000 pages
Duplex Printing	Yes
Memory	2 GB
Hard Disk Drive	160 GB
Print Technology	Laser
Copy Resolution	600 x 600 dpi
Scan Type	Color Scanner
Fax Transmission Speed	33.6 kbps
Max Paper Size	A3
Network Connectivity	Ethernet
Scan Speed	55 ppm (color) / 55 ppm (mono)
Connectivity	USB 2.0
Paper Size	A4, A5
Operating System Compatibility	Windows, Mac
Print Speed	Up to 25 ppm (color) / 25 ppm (mono)