Fuji Xerox DocuCentre-V C2265 Administrator's Guide

Machine Status
130
Machine Status
4
2 Select [Factory Defaults] or [Custom Settings].
Factory Defaults
You can use the factory default settings.
Custom Settings
Displays the numbers stored in memory.
3 When you select [Custom Settings], select a memory number to use.
4 Select [Save].
Password
For PDF Direct Print, if a password is set for files, set the password here in advance. PDF files
can be printed only when the passwords assigned and entered are the same.
You can use up to 32 characters for the password.
1 Press [Password].
2 Enter a password of up to 32 single-byte characters with the keyboard displayed, and select
[Save].
Fax Receiving Mode
You can set a mode for receiving faxes.
Note
z
As for IP fax (SIP), the machine always receives faxes automatically.
Reference
z
For information on auto receive and manual receive, refer to "Fax" > "Receiving Faxes" in the User Guide.
1 Press the <Machine Status> button.
2 Select [Fax Receiving Mode].

Fuji Xerox DocuCentre-V C2265 Specifications

General

Functions	Print, Copy, Scan, Fax
Print Resolution	1200 x 2400 dpi
Scan Resolution	600 x 600 dpi
Monthly Duty Cycle	Up to 50, 000 pages
Duplex Printing	Yes
Memory	2 GB
Hard Disk Drive	160 GB
Print Technology	Laser
Copy Resolution	600 x 600 dpi
Scan Type	Color Scanner
Fax Transmission Speed	33.6 kbps
Max Paper Size	A3
Network Connectivity	Ethernet
Scan Speed	55 ppm (color) / 55 ppm (mono)
Connectivity	USB 2.0
Paper Size	A4, A5
Operating System Compatibility	Windows, Mac
Print Speed	Up to 25 ppm (color) / 25 ppm (mono)