Tools
164
Tools
5
Calibration
When color gradation of a printed image shifts, you can calibrate the color of the image to
maintain the image quality of the machine at a certain level.
z
For more information, refer to "Executing Calibration" (P.103).
z
If you cannot calibrate the machine to adjust for a shift in color gradation despite the periodic calibration,
contact our Customer Support Center.
îš„ Screen Type
Select from [Copy Job], [Print Job 1], and [Print Job 2].
z
For more information about screen type, refer to "Executing Calibration" (P.103).
îš„ Paper Supply
Select a tray.
îš„ Target
Select from [Copy & Print Jobs], [Copy Jobs Only], [Print Jobs Only], and [None].
Adjust Color Registration
You can adjust color registration if colors are misaligned in outputs.
Selecting [Start] starts color registration.
z
Do not execute color registration continuously. Doing so may impair the performance of the machine.
Reports
You can configure settings related to printing reports.
Print Reports Button
Set the display method of [Print Reports] under the [Machine Information] screen and
[Error History Report] under the [Faults] screen displayed by pressing the <Machine Status>
button.
If you select [Disabled], the [Print Reports] button under [Machine Information] and the
[Error History Report] button under [Faults] are displayed only in the System Administration
mode.
If you select [Disabled], the [Print Reports] button under [Machine Status] > [Machine
Information] and the [Error History Report] button under [Faults] are displayed only in the
System Administration mode.
z
For information on Print Reports, refer to "Print Reports" (P.115).
z
For information on Error History Reports, refer to "Faults" (P.132).
To Next Page
Loading...
Need help?
General
