Fuji Xerox DocuCentre-V C2265 Administrator's Guide

Network-related Problems
491
Problem Solving
15
When connection to a desired Web server fails
IPv4 and IPv6 Connection Problems
The possible causes and remedies for problems when using an IPv4 or IPv6 address are as
follows:
Unable to connect using an IPv4 address
Unable to connect using an IPv6 address
Cause Remedy
The setting to use the proxy
server is not configured.
In the environment using the proxy server, you must
configure the machine to use the proxy server to
connect to a desired Web server. Make sure that you
configure the settings to use the proxy server.
The setting to use a proxy server
is configured even though the
environment doesnot use a
proxy server.
In an environment that does not use a proxy server,
such as when connecting to an intranet, do not make
the settings to use the proxy server.
The proxy server address
isincorrect.
When the settings to use a proxy server are configured,
you cannot connect to a desired Web server only if the
IP address of the proxy server is correct. Set the correct
IP address of the proxy server.
When the proxy server access
requires authentication, you
cannot connect to the server
because the user name or
password is incorrect.
Set the user name and password on the machine that
allow connection to the proxy server.
Symptom Remedy
When 0 (zero) is prepended to
the head of a value for the IPv4
address (for
example:192.0.2.010),
connection fails.
Do not prepend 0 (zero) to each value of an IPv4
address.
Symptom Remedy
You cannot connect to the
machine with the link-local
address.
When you specify the machine's link-local address, a
scope ID must be appended to the address. For
example, when you use Internet Explorer 7 on Windows
Vista to access the address "fe80::203:baff:fe48:9010",
you must append the Ethernet adapter local area
connection number (for example, 8) for Windows Vista
to the address as follows: fe80::203:baff:fe48:9010%8
The machine cannot connect to
a computer running Windows
OS that supportsIPv6.
Assign a static IPv6 address to the computer running
Windows OS that supports IPv6.Then, register the IPv6
address on the machine as host address to allow
communication.

Fuji Xerox DocuCentre-V C2265 Specifications

General

Functions	Print, Copy, Scan, Fax
Print Resolution	1200 x 2400 dpi
Scan Resolution	600 x 600 dpi
Monthly Duty Cycle	Up to 50, 000 pages
Duplex Printing	Yes
Memory	2 GB
Hard Disk Drive	160 GB
Print Technology	Laser
Copy Resolution	600 x 600 dpi
Scan Type	Color Scanner
Fax Transmission Speed	33.6 kbps
Max Paper Size	A3
Network Connectivity	Ethernet
Scan Speed	55 ppm (color) / 55 ppm (mono)
Connectivity	USB 2.0
Paper Size	A4, A5
Operating System Compatibility	Windows, Mac
Print Speed	Up to 25 ppm (color) / 25 ppm (mono)