Fuji Xerox DocuCentre-V C2265 Administrator's Guide

Warmer Mode
27
Before Using the Machine
1
4 Select [System Settings] > [Common Service Settings] > [Machine Clock/Timers].
5 Select [Warmer Mode], and then select [Change Settings].
Note
z
Select[ ]to display the previous screen or[ ]to display the next screen.
6 Select [On].
Note
z
If you select [Off], the machine will not enter the Warmer mode. To display a message when condensation
may have occurred, select [Condensation Alert].
7 Using[ ]and[ ], set the start time and duration of the Warmer mode.
Start Time
Set the start time of the Warmer mode.
Duration
Set the duration of the Warmer mode between 1 to 1440 minutes in 1 minute increments.

Fuji Xerox DocuCentre-V C2265 Specifications

General

Functions	Print, Copy, Scan, Fax
Print Resolution	1200 x 2400 dpi
Scan Resolution	600 x 600 dpi
Monthly Duty Cycle	Up to 50, 000 pages
Duplex Printing	Yes
Memory	2 GB
Hard Disk Drive	160 GB
Print Technology	Laser
Copy Resolution	600 x 600 dpi
Scan Type	Color Scanner
Fax Transmission Speed	33.6 kbps
Max Paper Size	A3
Network Connectivity	Ethernet
Scan Speed	55 ppm (color) / 55 ppm (mono)
Connectivity	USB 2.0
Paper Size	A4, A5
Operating System Compatibility	Windows, Mac
Print Speed	Up to 25 ppm (color) / 25 ppm (mono)