Fuji Xerox DocuCentre-V C2265 Administrator's Guide

Before Using the Machine
22
Before Using the Machine
1
z
100BASE-TX
z
10BASE-T
Note
z
The machine supports IEEE802.3az (a compliance standard of wired LAN) which reduces the power
consumption of the Ethernet equipments while suspending data transmission. To use this feature, both of
the equipments need to support IEEE802.3az.
This section describes the installation procedures for the Ethernet interface.
1 Press the power switch to switch off the power.
2 Make sure that the touch screen is blank and the <Power Saver>button does not light up.
3 Open the front cover.
4 Press the main power switch to the [ ] position to switch off the main power.
5 Connect a network cable to the Ethernet interface connector.
z
When the Secondary Ethernet Kit (optional) is not installed
z
When the Secondary Ethernet Kit (optional) is installed.
Note
z
Prepare a network cable suitable for your network connection. When you replace the network cable, contact
our Customer Support Center.
6 Press the main power switch to the [ ｜ ] position to switch on the main power.
7 Close the front cover.
8 Press the power switch to switch on the power.
Reference
z
For more information on setting items, refer to "Printer Environment Settings" (P.335).

Fuji Xerox DocuCentre-V C2265 Specifications

General

Functions	Print, Copy, Scan, Fax
Print Resolution	1200 x 2400 dpi
Scan Resolution	600 x 600 dpi
Monthly Duty Cycle	Up to 50, 000 pages
Duplex Printing	Yes
Memory	2 GB
Hard Disk Drive	160 GB
Print Technology	Laser
Copy Resolution	600 x 600 dpi
Scan Type	Color Scanner
Fax Transmission Speed	33.6 kbps
Max Paper Size	A3
Network Connectivity	Ethernet
Scan Speed	55 ppm (color) / 55 ppm (mono)
Connectivity	USB 2.0
Paper Size	A4, A5
Operating System Compatibility	Windows, Mac
Print Speed	Up to 25 ppm (color) / 25 ppm (mono)