Fuji Xerox DocuCentre-V C2265 Administrator's Guide

Before Using the Machine
36
Before Using the Machine
1
5 Select [Services Home], and then select [Change Settings].
Note
z
Select[ ]to display the previous screen or[ ]to display the next screen.
6 Select the position where you want to assign a service.
Note
z
Select[ ]to display the previous screen or[ ]to display the next screen.
z
The layout of the buttons in this screen corresponds to the layout of those on the Services Home screen.
7 Select a service you want to display on the Services Home screen.
Note
z
Select[ ]to display the previous screen or[ ]to display the next screen.
z
You cannot assign the same feature to more than one button.
8 Select [Save].
9 Select [Save].
Services Home - Additional Features
You can select additional feature buttons, which are displayed on the Services Home
screen.
If you select [(Not Assigned)], the position of the selected button becomes blank.
You cannot assign [Setup] to [(Not Assigned)]. If you do not want to display the [Setup]
button, select the [Show this in Admin mode] check box.

Fuji Xerox DocuCentre-V C2265 Specifications

General

Functions	Print, Copy, Scan, Fax
Print Resolution	1200 x 2400 dpi
Scan Resolution	600 x 600 dpi
Monthly Duty Cycle	Up to 50, 000 pages
Duplex Printing	Yes
Memory	2 GB
Hard Disk Drive	160 GB
Print Technology	Laser
Copy Resolution	600 x 600 dpi
Scan Type	Color Scanner
Fax Transmission Speed	33.6 kbps
Max Paper Size	A3
Network Connectivity	Ethernet
Scan Speed	55 ppm (color) / 55 ppm (mono)
Connectivity	USB 2.0
Paper Size	A4, A5
Operating System Compatibility	Windows, Mac
Print Speed	Up to 25 ppm (color) / 25 ppm (mono)