Fuji Xerox DocuCentre-V C2265 Administrator's Guide

Problem Solving
470
Problem Solving
15
The output color
differs between
Secure Print and
Print Stored File.
This is because the
print path is different.
The output color of
Print Stored File is
reproduced by the
presence or absence of
dots, as with copying
or faxing. On the other
hand, the output color
of Secure Print is
reproduced using
density by default, as
with printing.
To closer match the color of Secure Print
and files in folder, select [On] in [Image
Options] > [Print Page Mode] on the
[Advanced] tab of the print driver settings.
The print color
differs from before.
The color calibration is
incorrect.
Execute auto calibration.
Reference
z
Refer to "Executing Calibration" (P.103).
Black lines are
printed.
A print driver for
another machine is
used.
Install the print driver for your machine.
Symptom Cause Remedy

Fuji Xerox DocuCentre-V C2265 Specifications

General

Functions	Print, Copy, Scan, Fax
Print Resolution	1200 x 2400 dpi
Scan Resolution	600 x 600 dpi
Monthly Duty Cycle	Up to 50, 000 pages
Duplex Printing	Yes
Memory	2 GB
Hard Disk Drive	160 GB
Print Technology	Laser
Copy Resolution	600 x 600 dpi
Scan Type	Color Scanner
Fax Transmission Speed	33.6 kbps
Max Paper Size	A3
Network Connectivity	Ethernet
Scan Speed	55 ppm (color) / 55 ppm (mono)
Connectivity	USB 2.0
Paper Size	A4, A5
Operating System Compatibility	Windows, Mac
Print Speed	Up to 25 ppm (color) / 25 ppm (mono)