Fuji Xerox DocuCentre-V C2265 Administrator's Guide

PCL Emulation
687
Appendix
16
Binding 217 Sets binding when printing 2 sided.
You can select [LEF] or [SEF] for 2 sided printing. Select according to the edge to
be bound. Unifies the leading direction of the image on the front and rear sides
of the paper at the long edge of the paper for LEF and at the short edge of the
paper for SEF.
[0] (Default): LEF
[1]: SEF
Line termination 218 Sets line termination processing.
[0] (Default): Off
[1]: Add-LF (Appends an LF to CR)
[2]: Add-CR (Appends a CR to LF and FF)
[3]: CR-XX (Appends a CR to LF and FF, and LF to CR)
Default custom
paper size
219(Short
edge)
Specifies the default custom paper size.
[2100] (Default short-edge value) : 210.0 mm
[2970] (Default long-edge value) : 297.0 mm
[0] - [9999]: 0 to 999.9 mm
220(Long
edge)
221 Sets the method for specifying the number of copies to print.
[0] : Protocol
[1]: Panel
[2](Default): Command
Parameter Item No. Value

Fuji Xerox DocuCentre-V C2265 Specifications

General

Functions	Print, Copy, Scan, Fax
Print Resolution	1200 x 2400 dpi
Scan Resolution	600 x 600 dpi
Monthly Duty Cycle	Up to 50, 000 pages
Duplex Printing	Yes
Memory	2 GB
Hard Disk Drive	160 GB
Print Technology	Laser
Copy Resolution	600 x 600 dpi
Scan Type	Color Scanner
Fax Transmission Speed	33.6 kbps
Max Paper Size	A3
Network Connectivity	Ethernet
Scan Speed	55 ppm (color) / 55 ppm (mono)
Connectivity	USB 2.0
Paper Size	A4, A5
Operating System Compatibility	Windows, Mac
Print Speed	Up to 25 ppm (color) / 25 ppm (mono)