CAUTION!
Double check the cabling. Do not continue if you are not absolutely sure that the
cabling is correct. Otherwise booting up the device could damage the existing
configuration with the result of data loss.
External cabling of the Scale system
There are three different versions of the Scale model, which can be distinguished by the ports
respectively the PCI slots used in the server, see table "Usage of PCI Slots - Scale System"
on page 59.
Please refer to the pictures below to identify the model and to see which ports can be
connected to the LAN and SAN.
Figure 72: Scale System, with 8Gb/s FC*) option
Figure 73: Scale System with the 1 Gb/s Ethernet and 8Gb/s FC*) options
ETERNUS CS800 105
5 Installing the ETERNUS CS800 S6 Modules
To Next Page
Loading...
