Default Gateway The default gateway IP address.
Specifying a default gateway is optional if all access
is local to a particular subnet. For example, if the
ETERNUS CS800 and all of its clients are on the
same subnet, you do not need to specify a default
gateway.
CAUTION!
Specifying a default gateway is required to
enable connectivity with all subnets other than
those that the ETERNUS CS800 is directly
connected to. For example, if the ETERNUS
CS800 and its clients are on different subnets,
or you are using an external NTP server, you
must specify a default gateway.
DNS Suffix Search List (Optional) The domain list to search when resolving
domain names.
The list may be either a single domain name or a
comma-separated list of up to 6 domain names. The
first domain name listed is used as the local domain.
Domain names must contain only letters [A–Z, a–z ],
numbers [0–9 ], dots [. ], and hyphens [- ].
Primary, Secondary, and Tertiary
DNS IP Address
(Optional) The IP addresses of up to three DNS
servers used to resolve domain names and translate
them into IP addresses.
You must specify a DNS IP address if you plan
to use hostname format when configuring an
NTP time server, outgoing e-mail server,
replication sources and targets, and other
information.
The DNS Suffix Search List and DNS IP Addresses cannot be modified if the
ETERNUS CS800 is currently joined to a Windows domain. To disjoin a Windows
domain, see "Disjoining a Workgroup or Domain" on page 210
Configuring Bonding Details
Under IP Address Configuration > Bonding Details, configure bonded devices (see
"Network Page: Bonding Details" on page 118):
ETERNUS CS800 117
6 Initial Configuration, Connecting with the Network
To Next Page
Loading...
