Step 5: Add Share
1. Under Add Share, enter information about the NAS share (see "NAS Wizard: Add
Share" on page 154):
Name Enter the name of the NAS share.
Description (Optional) Enter a brief description of the
share.
Enable deduplication Select the check box to enable data
deduplication. Fujitsu Technology Solutions
recommends that you enable data
deduplication to optimize disk usage.
Data deduplication is enabled by
default. You cannot enable or disable
data deduplication after the share is
added.
Hide from network browsing (Windows shares only) Select the check box
to hide the share from network browsing. If
selected, you cannot see the share when
browsing the network.
Export Protocol (Available only if you selected the Both option
in Step 2: Protocol) Select the export protocol
for the share:
l CIFS - Select the CIFS option to use the
share on a Windows network.
l NFS - Select the NFS option to use the
share on a UNIX or Linux network.
2. Click Add.
3. (Optional) To add additional shares, repeat Steps 1–2.
4. Click Next to continue.
ETERNUS CS800 153
8 Configuration Wizards
To Next Page
Loading...
