Fujitsu ETERNUS CS800 - Page 154

8.2 NAS Wizard
Figure 103: NAS Wizard: Add Share
Step 6: Confirm
1. Review the settings you selected to make sure they are correct (see "NAS Wizard:
Confirm" on page 155). If necessary, click Previous to return to a previous step to make
changes.
2. To make changes to a NAS share you added, first select the share and click Delete to
delete the share. Then click Previous to return to the previous step and add a new share.
3. After you have confirmed all settings, click Finish. The wizard configures the
ETERNUS CS800 with the settings you selected.
154 ETERNUS CS800