Fujitsu ETERNUS CS800 - Page 166

8.4 OST Wizard
3. (Optional) To add additional LSUs, repeat Steps 1–2.
To remove an LSU, select it in the LSUs Added table and click Delete.
4. Click Next to continue.
To configure the LSU for Automatic Image Replication, use the Configuration >
OST > LSU page (see "LSU" on page 252).
Figure 113: OST Wizard: Add LSUs
Step 4: Add Users
1. Enter information about the authenticated user (see "OST Wizard: Add Users" on page
167):
Username Enter the name of the authenticated user.
Password Enter the password for the authenticated user.
Confirm Password Enter the password again to confirm it.
Description (Optional) Enter a brief description of the authenticated
user.
2. Click Apply.
The user displays in the Users Added table.
3. (Optional) To add additional users, click Add and then repeat Steps 1–2.
To remove a user, select it in the Users Added table and click Delete.
4. Click Next to continue.
166 ETERNUS CS800