Fujitsu ETERNUS CS800 - Page 182

8.7 AIS Connect
AISConnect uses the HTTP protocol to connect via the Internet to the Fujitsu Support
Centre. AISConnect allows to configure a HTTP proxy in order to connect from a
corporate network to the Internet. Please ask your network administrator about what
proxy and what proxy authentication to use.
To register the ETERNUS CS800 system with the Fujitsu Support Centre, please
place a service request at the Fujitsu Service Desk
http://ts.fujitsu.com/support/servicedesk.html
For more information about AIS Connect, see "AIS Connect" on page 315.
To begin the AISConnect wizard, on the Wizards menu, click AIS Connect.
Step 1: About
1. Read the information about the wizard (see the Figure below).
2. Click Next to continue.
At any time while using the wizard, you can click Previous to return to the
previous step.
Figure 126: AISConnect Wizard: About
Step 2: Proxy
If your network environment requires use of a proxy server, you must specify the proxy
server settings to enable AISConnect.
182 ETERNUS CS800