10.3 VTL Configuration
To edit a VTL partition:
1. Select the partition and click Edit.
The Edit VTL Partition & Replication Settings page displays (see "Edit VTL Partition
& Replication Settings Page" on page 222).
Figure 148: Edit VTL Partition & Replication Settings Page
2. If the partition is online, click Offline to take the partition offline. To edit a partition, it
must be offline.
3. Under Partition Settings, enter information about the partition:
If you are editing a partition, only the Library Model, Number of Storage Slots, and
Number of Virtual Tape Drives options can be changed.
Library Model Select the library model emulated by the partition. The library
model determines the inquiry string returned to the host by the
ETERNUS CS800.
The following library models are available:
Models
l Fujitsu CS-TL
l ADIC Scalar 100, ADIC Scalar i2000, or ADIC Scalar
i500
l ADIC Pathlight VX
222 ETERNUS CS800
To Next Page
Loading...
