Fujitsu ETERNUS CS800 - Page 227

Figure 150: Media Actions Page
To perform actions on virtual tape cartridges:
1. In the Partition drop-down box, select the partition that contains the cartridges to work
with.
Select UNASSIGNED to work with cartridges that are not assigned to any
partition.
The table displays the following information for all virtual tape cartridges in the partition:
Barcode The barcode number of the cartridge.
Type The cartridge type.
Partition The partition where the cartridge is located.
WP The write protect status of the cartridge (Write Enabled or Write
Protected).
ETERNUS CS800 227
10 Configuration