10.3 VTL Configuration
State The state of the cartridge:
State:
l Scratch - Scratch newly created virtual media or virtual media that
has been recycled with no data on it.
l Virtual - Virtual media with data on it.
l Virtual, Mounted - Virtual media with data that is mounted in a
tape drive.
l Vaulted - Virtual media with data that has been exported from a
partition. Data is still intact on the virtual media.
l Exported - Virtual media with no data that has been exported from
a partition. Media has to be in this state before it can be deleted
from the ETERNUS CS800.
l Pool - The type of cartridge pool such as application, cleaning,
service, or unknown.
Used (%) The percentage of the tape cartridge that is used.
CAUTION!
The Used (%) value is not updated while the media is mounted.
Because of this, the displayed Used (%) value may be different fr
om the real value for mounted media.
Capacity The total capacity of the tape cartridge.
Click a column heading to sort the rows in the table by that column. Click the
column heading again to reverse the sort order.
Click the Information button [i] next to a cartridge to display detailed
information about the cartridge.
2. In the Action drop-down box, select the action to perform:
Delete Deletes a cartridge from the *UNASSIGNED partition. The
cartridge must be in the exported state.
Export Removes a cartridge from the virtual media changer and
places it in an exported state. Perform this action if an export
cannot be performed from the backup application. The
cartridge must be in the vaulted, scratch, or virtual state.
228 ETERNUS CS800
To Next Page
Loading...
