10.3 VTL Configuration
Figure 152: Media Unload Page
To unload virtual tape cartridges:
1. In the Partition drop-down box, select the partition that contains the cartridges to unload.
2. If the partition is online, click Offline to take the partition offline. To unload media, the
partition must be offline.
3. In the Show Location drop-down box, select the type of location you want to unload
cartridges from (Drive, I/E Slot).
4. (Optional) If you are unloading cartridges from a drive, select the Force Unload (Virtual
Tape Drives) check box to force drives to unload the cartridges before ejecting them.
5. (Optional) To reduce the number of cartridges displayed in the table, enter a barcode or
barcode range in the Barcode Filter box and click Apply Filter.
Use a hyphen (-) to indicate a range, and use an asterisk (*) to indicate a wildcard.
Separate multiple entries with commas, and do not use spaces.
232 ETERNUS CS800
To Next Page
Loading...
