Tasks
Use the Storage Servers page to perform the following tasks:
l View information about existing storage servers (see "Storage Server List" on page 245).
l Add a new storage server to the system (see "Adding a Storage Server" on page 246).
l Edit properties for an existing storage server (see "Editing a Storage Server" on page
250).
l Delete a storage server from the system (see "Deleting a Storage Server" on page 251).
Storage Server List
The Storage Server List displays the following information for all storage servers on the
ETERNUS CS800:
Storage
Servers
The number of storage servers that have been added to the system.
Maximum
Storage
Servers
The maximum number of storage servers that can be added to the system.
LSUs The number of logical storage units (LSUs) that have been added to the
system (see "LSU" on page 252).
OST Service The status of the OST service. OST settings can be configured in Ready,
Stopped, or Verifying state. The OST server is available for backup only in
Ready state.
Name The name of the storage server.
LSUs The number of LSUs that have been added to the storage server.
Max
Connections
The maximum number of connections allowed to the storage server.
Active
Connections
The number of currently active connections to the storage server.
Backup
Images
The number of backup images on the storage server.
Optimized
Duplication
The status of Concurrent Optimized Duplication for the storage server
(Enabled or Disabled), as well as the configured targets (if any).
Description A brief description of the storage server (if available).
Click a column heading to sort the rows in the table by that column. Click the column
heading again to reverse the sort order.
ETERNUS CS800 245
10 Configuration
To Next Page
Loading...
