Adding a Remote User
Add a remote user to create OST user credentials for use with OST AIR. When you enable
Automatic Image Replication for an LSU, you specify a remote user. The remote user
credentials on the source ETERNUS CS800 must match the local user credentials on the
target (remote) ETERNUS CS800.
To add a remote user:
1. Click Add.
The Add Remote AIR Credential window displays (see "Add Remote AIR Credential"
on page 263).
Figure 170: Add Remote AIR Credential
2. Enter information about the remote user:
User name Enter the name of the remote user.
New Password Enter the password for the remote user.
Confirm New Password Enter the password again to confirm it.
Description (Optional) Enter a brief description of the remote user.
3. Click Apply.
Editing a Remote User
Edit a remote user to change the user's password or description.
To edit a remote user:
1. Select the user and click Edit.
The Edit Remote Credentials window displays (see "Edit Remote Credentials" on
page 264).
ETERNUS CS800 263
10 Configuration
To Next Page
Loading...
