IP Address (Optional) Select a different destination to edit.
Name Enter the name of the destination.
3. Select one or more traps to send to the destination:
Failure Sends failure traps.
Warning Sends warning traps.
Informational Sends informational traps.
Available Sends a trap when the system transitions from an unavailable to an
available state.
Unavailable Sends a trap when the system transitions from an available to an
unavailable state.
4. Click Apply.
Deleting a Destination
Delete an SNMP destination if you no longer want the ETERNUS CS800 to send traps to the
destination.
To delete a destination, select the destination and click Delete.
You can select multiple destinations to delete at once.
Community
The Community page allows you to manage SNMP community information for the
ETERNUS CS800. You can add, edit, and delete communities, and you can specify the
community access type.
To access the Community page, on the SNMP page, click the Community tab (see
"Community Page" on page 310).
ETERNUS CS800 309
10 Configuration
To Next Page
Loading...
