10.8 Notifications
Warning Sends warning traps.
Informational Sends informational traps.
Available Sends a trap when the system transitions from an unavailable to an
available state.
Unavailable Sends a trap when the system transitions from an available to an
unavailable state.
4. Click Apply.
Editing a Destination
Edit an SNMP destination to change the name of the destination or the types of traps the
ETERNUS CS800 sends to the destination.
To edit a destination:
1. Select SNMP destination and click Edit.
The Edit Trap Destination page displays (see "Edit Trap Destination Page" on page
308).
Figure 197: Edit Trap Destination Page
2. Enter information about the destination:
If you are editing a destination, you cannot change the IP Address.
308 ETERNUS CS800
To Next Page
Loading...
