10.9 System
The default setting is disabled.
2. Click Apply.
Server Authentication Warnings
Enabling SSL with the default Fujitsu Technology Solutions certificate allows you to securely
communicate with the Fujitsu Technology Solutions Web-based interface using SSL
encryption. However, you may receive a warning from your Web browser and network
security scanners stating that the server you are attempting to connect to does not match the
server embedded within the certificate.
This is expected behavior because the default certificate can only be used for encryption and
not server authentication. Fujitsu Technology Solutions recommends the default Fujitsu
Technology Solutions certificate be replaced with your own official certificate specific to your
ETERNUS CS800 system. You can install your own custom certificate in order to take
advantage of server authentication in addition to encrypted communication.
To suppress server authentication warnings for the default certificate:
l Internet Explorer - If a dialog box displays warning you of a possible certificate error,
add the IP address for the Fujitsu Technology Solutions to the Trusted Sites list (Tools
> Internet Options > Security > Trusted Sites). If subsequent warning pages display
along with an option to close your Web browser or continue to the Web site, click
Continue. This suppresses the warnings until you restart your Web browser.
l Firefox - If the Secure Connection Failed dialog box displays, click the link at the
bottom of the dialog box and follow the instructions to add an exception for your
ETERNUS CS800
Installing an SSL Certificate
You can purchase and install your own custom SSL certificate in order to take advantage of
server authentication in addition to encrypted communication on the ETERNUS CS800.
To install an SSL certificate:
1. Under Certificate, click New.
The Install New Certificate page displays (see "Install New Certificate Page" on page
353).
352 ETERNUS CS800
To Next Page
Loading...
