Figure 227: Install New Certificate Page
2. In the Certificate File box, type the location and filename of the new SSL certificate file.
Or click Browse to browse the system and locate the SSL certificate file. The SSL
certificate file must be named server.crt.
3. Click Upload.
4. Type your SSL private key and press <Enter>.
5. Type your SSL passphrase and press <Enter>.
A Successful Upload page displays stating that the SSL certificate file has been
installed on the system.
6. Click OK.
The certificate displays in the Certificate section.
Data Encryption
The Data Encryption page allows you to select the type of encryption to use for OST data
transfers. OST data sent from the media server to the ETERNUS CS800 can be encrypted
using AES (Advanced Encryption Standard) encryption methods.
This setting does not apply to data transfers during replication. For replication, specify
encryption settings when configuring the replication or failback targets (see "Replication " on
page 191).
To access the Data Encryption page, on the Security page, click the Data Encrypton tab
(see "Data Encryption Page" on page 354).
ETERNUS CS800 353
10 Configuration
To Next Page
Loading...
