Component The name of the Fibre Channel and/or card.
Click the name of the card to view detailed information for the card below.
Status The status of the Fibre Channel card.
l Normal - (Green) The component is operating correctly.
l Attention - (Yellow) There is a problem with the component.
l Failed - (Red) The component has failed.
The Fibre Channel Controller section displays the following information about the ports in
the selected Fibre Channel or SAS controller:
Component The number of the Fibre Channel port.
Value - The throughput capacity of the port (if connected).
Status The status of the port.
l Up - (Green) The port is connected.
l Down - (Green) The port is not connected.
Network Ports
The Network Ports page allows you to view information about Ethernet ports in the system.
The ETERNUS CS800 includes three or more Ethernet ports (depending on the
configuration).
To access the Network Ports page, on the Details page, click the Network Ports tab (see
"Network Ports Page" on page 412).
ETERNUS CS800 411
12 Status
To Next Page
Loading...
