12.5 VTL Status
Logical View
Use the Logical View page to view information about the virtual (logical) components in a
VTL partition. You can also view information about used space in the partition.
To access the Logical View page, on the VTL Status page, click the Logical View tab (see
"Logical View Page" on page 426).
Figure 270: Logical View Page
The Partitions section displays the following information about VTL partitions:
Partition The name of the partition.
Number of Drives The number of virtual tape drives in the partition.
Capacity The storage capacity of the partition.
Used The amount of space on all cartridges in the partition currently
used to store data. The value for Used might be less than the
original, native (raw) data size because the data is compressed
before it is written to the media.
Used Percent The amount of currently used space on all cartridges in the
partition expressed as a percentage of the total capacity
([Used / Capacity ] x 100 ).
426 ETERNUS CS800
To Next Page
Loading...
