Fujitsu Remote Management - Configuring, Starting and Exiting the Remote Storage Server

130 iRMC S2/S3
Providing remote storage via a Remote Storage server
6.2.3 Configuring, starting and exiting the Remote
Storage server
You configure, start and exit the Remote Storage server via a graphical user
interface (GUI).
Calling the Remote Storage server’s raphical user interface
You call the Remote Storage server’s graphical user interface as follows:
Ê Choose Start - Programs - Fujitsu RemoteStorageServer - Remote Storage Server.
The Remote Storage server’s graphical user interface appears:
Figure 60: The Remote Storage server’s graphical user interface (here in the “Idle” state)