Fujitsu Remote Management - 7.2 Required user permissions

138 iRMC S2/S3
Required user permissions
7.2 Required user permissions
table 4 provides an overview of the permissions which are required in order to
use the individual functions available at the iRMC S2/S3 web interface.
Functions in the iRMC S2/S3 web interface Permitted with
IPMI privilege
level
Required
iRMC S2/S3-
specific
permission
OEM Administrator Operator User Configure User Accounts Configure iRMC S2/S3 Settings Video Redirection Enabled Remote Storage Enabled
Open the System Overview page. X X X X
Switch identification LED on/off. X X X X
Set Asset Tag Configuration. X
Edit Operating System Informations
1)
X
Open the System Component Information page. X X X X
Reset Memory Error Counter. X
View SPD Data. XXXX
Open the Backup/Restoration of BIOS Single Parameter
Settings page.
2)
X X X X
Edit Backup/Restoration of BIOS Single Param. Settings
2)
XX
Open the BIOS Update Settings page.
2)
X X X X
Perform BIOS update
2)
XX X
Open the iRMC S2/S3 Information page. X X X X
Reboot iRMC S2/S3.XX
Load license key onto the iRMC S2/S3. X
Set Miscellaneous Options
X
Open the Save iRMC S2/S3 FW Settings page. X X
Table 4: Permissions to use special the iRMC S2/S3 web interface