68 iRMC S2/S3
User permissions
4.2 User permissions
The iRMC S2/S3 distinguishes between two mutually complementary types of
user permissions:
– Channel-specific privileges (via assignment to channel-specific permission
groups)
– Permissions to use special iRMC S2/S3 functions
I The privileges and permissions required for the use of the individual
iRMC S2/S3 functions are described
– for the iRMC S2/S3-web interface, on page 138,
– for the Remote Manager, on page 330.
Channel-specific privileges (channel-specific permission groups)
The iRMC S2/S3 assigns each user identification to one of the following four
channel-specific permission groups:
–users
– Operator
– Administrator
–OEM
Since iRMC S2/S3 assigns these permissions on a channel-specific basis,
users can have different permissions, depending on whether they access the
iRMC S2/S3 over the LAN interface or the serial interface.
The scope of permissions granted increases from User (lowest permission level)
through Operator and Administrator up to OEM (highest permission level).
I The permission groups correspond to the IPMI privilege level. Certain
permissions (e.g. for Power Management) are associated with these
groups or privilege levels.
To Next Page
Loading...