Fujitsu Remote Management - 12 Appendix; IPMI OEM Commands Supported by the Irmc S2;S3; Overview

iRMC S2/S3 385
12 Appendix
The appendix provides you with information about the following topics:
– "IPMI OEM Commands supported by the iRMC S2/S3" on page 385
– "Configuring the iRMC S2/S3 via SCCI and scripted configuration" on
page 412
12.1 IPMI OEM Commands supported by the
iRMC S2/S3
This section describes a selection of OEM-specific IPMI commands supported
by the iRMC S2/S3.
12.1.1 Overview
The following OEM-specific IPMI commands are supported by the iRMC S2/S3:
● SCCI-compliant Power On/Off commands
(SCCI: ServerView Common Command Interface)
– 0115 Get Power On Source
– 0116 Get Power Off Source
– 011C Set Power Off Inhibit
– 011D Get Power Off Inhibit
– 0120 Set Next Power On Time
● SCCI-compliant communication commands
– 0205 System OS Shutdown Request
– 0206 System OS Shutdown Request and Reset
– 0208 Agent Connect Status
– 0209 Shutdown Request Canceled
● SCCI-compliant signaling commands
– 1002 Write to System Display