Fujitsu Remote Management - Configuring Text Console Redirection for the Irmc S2

iRMC S2/S3 49
Configuring text console redirection via LAN
3.2.1 Configuring text console redirection for the
iRMC S2
Ê Call the BIOS / TrustedCore setup utility of the managed server. Do this by
pressing [F2] while the server is booting.
Settings in the Peripheral Configuration menu
Ê Call the Peripheral Configuration menu:
Advanced – Peripheral Configuration
Figure 10: Peripheral Configuration menu (as it appears in the TrustedCore setup utility)
Ê Configure the following settings:
Serial 1
Set the value to Enabled.
Serial 1 Address
Accept the first value pair proposed.
Serial Multiplexer
Set the value to iRMC.