iRMC S2/S3 255
Alerting - Configure alerting
7.13.2 Serial / Modem Alerting -
Configure alerting via modem
I The Serial / Modem Alerting page is only available with the iRMC S2.
The Serial / Modem Alerting page allows you to configure how alerts are
forwarded via a modem.
Figure 144: Serial / Modem Alerting page
Modem Alerting Enable
Enables or disables serial / modem alerting.
Modem Init String
Please refer to your modem documentation for details on this entry.
Modem Reset/Hangup String
Please refer to your modem documentation for details on this entry.
Modem Dial Prefix
This entry will depend on the type of connection you have.
To Next Page
Loading...