350 iRMC S2/S3
Configuring via Server Configuration Manager
9.3 alling the Server Configuration Manager
from the Operations Manager
The Server Configuration Manager dialog boxes for configuring the iRMC S2/S3
are also available from the graphical user interface of the Operations Manager.
This allows you to configure the iRMC S2/S3 of the managed server from the
remote workstation via a Web interface.
Proceed as follows:
Ê Start the Operations Manager (refer to the manual “ServerView Operations
Manager”).
The start window of the Operations Manager opens:
Figure 214: Operations Manager: Start window
To Next Page
Loading...