iRMC S2/S3 37
2 Logging on to the iRMC S2/S3 for
the first time
The factory default settings of the iRMC S2/S3 allow you to log in to the
iRMC S2/S3 for the first time without the need for any configuration activities.
2.1 Requirements
On the remote workstation:
– Windows: Internet Explorer as of Version 7.x:
Linux: Mozilla Firefox 3.x.
– For console redirection:
Sun Java Virtual Machine Version 1.5.0_06 or higher.
In your network:
– You must have a DHCP server in your network.
– If you want to log in with a symbolic name rather than an IP address at the
iRMC S2/S3 web interface, the DHCP server in your network must be
configured for dynamic DNS.
– DNS must be configured. Otherwise you must ask for the IP address.
To Next Page
Loading...