Fujitsu Remote Management - Event Log Configuration - Configure IPMI SEL and Internal Event Log

230 iRMC S2/S3
System Event Log and Internal Event Log
7.10.3 Event Log Configuration -
Configure IPMI SEL and internal event log
On the Event Log Configuration page, you can configure the IPMI system event
log (SEL) and the internal eventlog.
You can configure for each of the event logs
– the entries which are displayed by default on the System Event Log Content
page (see page 224) and on the Internal Event Log Content page (see
page 227), respectively.
– whether IPMI SEL and internal eventlog are organized as a ring buffer or a
linear buffer.
Figure 130: Event Log Configuration page