10.2 Setting up the USB memory stick
I You do not need the USB memory stick if you update the firmware of the
iRMC S2/S3 in one of the following ways:
– using the ServerView Update Manager
– using ServerView Update Manager Express or ASP
– using the iRMC S2/S3 web interface and TFTP server
Proceed as follows:
Ê Download the firmware iRMC Firmware Update for USB Stick from the
Download section of the Fujitsu Technology Solutions web server to a
directory on your computer.
The ZIP archive FTS_<spec>.zip can be found in your download directory.
(The <spec> part of the name provides information on the system type,
system board, firmware/SDRR version etc.)
The ZIP archive includes the following files:
– USBImage.exe
– iRMC_<Firmware-Version>.exe
– iRMC_<Firmware-Version>.IMA
Ê Connect the USB memory stick to your computer.
Ê Start the file iRMC_<Firmware-Version>.exe or the file USBImag.exe.
One of the following windows is opened depending on the file you call (see
figure 218 on page 358):
To Next Page
Loading...