Fujitsu Remote Management - Certificate Upload - Load the DSA;RSA Certificate and Private DSA;RSA Key

172 iRMC S2/S3
iRMC S2/S3 - Information, firmware and certificates
7.6.3 Certificate Upload - Load the DSA/RSA certificate
and private DSA/RSA key
The Certificate Upload page allows you to load a signed X.509 DSA/RSA
certificate (SSL) from a Certificate Authority (CA) and/or your private DSA/RSA
key (SSH) onto the iRMC S2/S3.
I The iRMC S2/S3 is supplied with a predefined server certificate (default
certificate). If you want to access the iRMC S2/S3 over secure SSL/SSH
connections, it is recommended that you replace the certificate with one
signed by a Certificate Authority (CA) as soon as possible.
I Input format of the X.509 DSA/RSA certificate and the private DSA/RSA
key:
The X.509 DSA/RSA certificate and the RSA/DSA must both be
available in PEM-encoded format (ASCII/Base64).