Fujitsu Remote Management - Configuring Text Console Redirection for the Irmc S3

iRMC S2/S3 53
Configuring text console redirection via LAN
3.2.2 Configuring text console redirection for the
iRMC S3
Ê Call the UEFI setup utility of the managed server. Do this by pressing [F2]
while the server is booting.
Ê Call the Server Mgmt menu:
Figure 13: Server Mgmt Menu
Ê Make the following settings:
Serial Multiplexer
Set the value to iRMCS3.