Fujitsu Remote Management - Scripting with Visual Basic (VB) Script

422 iRMC S2/S3
Configuring the iRMC S2/S3 via SCCI and scripted configuration
12.2.2.3 Scripting with Visual Basic (VB) Script
The following VB script sends a configuration file to the iRMC S2/S3:
IP_ADDRESS = "<iRMC S2/S3 IP address>"
USER_NAME = "admin"
PASSWORD = "admin"
FILE_NAME = ".\\ConfigFile.pre"
Const ForReading = 1
Set objFSO = CreateObject("Scripting.FileSystemObject")
Set objFile = objFSO.OpenTextFile(FILE_NAME, ForReading)
' --------------------------------------------------------------
On Error Resume Next
Set xmlHttp = CreateObject("Microsoft.XMLHTTP")
xmlHttp.Open "POST", "http://" & IP_ADDRESS & "/config", False,
USER_NAME, PASSWORD
xmlhttp.setRequestHeader "Content-Type", "application/x-www-
form-urlencoded"
xmlHttp.Send objFile.ReadAll
Wscript.Echo xmlhttp.responsexml.xml