Fujitsu Remote Management - Power Consumption Configuration - Configure Power Consumption of the Server

200 iRMC S2/S3
Power Consumption
7.8.1 Power Consumption Configuration - Configure
power consumption of the server
The Power Consumption Configuration page allows you to specify the mode the
iRMC S2/S3 uses to control the power consumption of your PRIMERGY server.
Figure 110: Power Consumption Configuration page
I Prerequisite:
The following requirements must be met in order to configure power
consumption control:
– The managed PRIMERGY server must support this feature.
– The Enhanced Speed Step or the Processor Power Management option
must be enabled in the Advanced Menu of the BIOS setup.
I If you set the “Power Limit” power control mode in the Power Consumption
Options group or in the Scheduled Power Consumption Configuration, the
Power Limit Options group is also displayed (see page 202).