180 iRMC S2/S3
iRMC S2/S3 - Information, firmware and certificates
Certificate Information and Restore
The Certificate Information and Restore group allows you to view the currently
valid DSA/RSA certificate and/or restore the default RSA/DSA certificate.
View Certificate
You can view the currently valid DSA/RSA certificate using this button.
Default Certificate
You can use this button to restore the default certificate delivered with the
firmware after you have confirmed that you wish to do so.
Certificate Creation
Proceed as follows to create a self-signed certificate:
Ê Enter the requisite details under Certificate Creation.
Ê Click Create to create the certificate.
I When generating the new certificate, all the existing HTTPS
connections are closed and the HTTPS server is automatically
restarted. This can take up to 5 minutes depending on the key length.
No explicit reset of the iRMC S2/S3 is required.
To Next Page
Loading...