246 iRMC S2/S3
Network Settings - Configure the LAN parameters
Ports for web-based access
Session Timeout
Period of inactivity (in seconds) after which the session is automatically
closed. The login page of the iRMC S2/S3 web interface then appears,
and you can log in again as required (see page 136).
I Your session will not automatically be closed if it is inactive when
the time specified in Session Timeout has elapsed if you enter a
value for the refresh interval which is less than the Session Timeout
in the Refresh every ... seconds field (see page 247).
HTTP Port
HTTP port of the iRMC S2/S3
Default port number: 80
Configurable: yes
Enabled by default: yes
Communication direction: inbound and outbound
HTTPS Port
HTTPS (HTTP Secure) port of the iRMC S2/S3
Default port number: 443
Configurable: yes
Enabled by default: yes
Communication direction: inbound and outbound
Force HTTPS
If you enable the Force HTTPS option, users can only establish a secure
connection to the iRMC S2/S3 on the HTTPS port specified in the entry
field.
If you disable the Force HTTPS option, users can establish a non-secure
connection to the iRMC S2/S3 on the HTTP port specified in the entry
field.
I If the SSL certificate has expired, a message to this effect is
issued in the browser.
Enable Auto Refresh
If you activate this option, the contents of the iRMC S2/S3 web interface
are automatically refreshed periodically. Specify the refresh interval in
the Refresh every ... seconds field.
To Next Page
Loading...