Fujitsu Remote Management - Page 407

iRMC S2/S3 407
IPMI OEM Commands supported by the iRMC S2/S3
F5 45 - Get SEL Entry Text
This command translates a given System Event Log SEL entry into ASCII text.
Request Data - B8 NetFnlLUN: OEM/Group
- F5 Cmd : Command Group iRMC
1:3 80 28 00 IANA-Enterprise-Number FTS, LS Byte first
4 45 Command Specifier
5:6 Record ID of SDR, LS Byte first
Response Data - BC
- F5
1 Completion Code
2:4 80 28 00 IANA-Enterprise-Number FTS, LS Byte first
5:6 Next Record ID
7:8 Actual Record ID
9 Record type
10:13 Timestamp
14 Severity: Bit 7: 0 = No CSS component
1 = CSS component
Bit 6-4: 000 = INFORMATIONAL
001 = MINOR
010 = MAJOR
011 = CRITICAL
1xx = Unknown’
Bit 3-0: reserved, read as 0000
15 Data length
16:35 Converted SEL data