Chapter 9 How to Use the XSCF Web 9-27
TABLE 9-21 lists the functions for configuring security access for SNMPv3. Select
[Settings]-[SNMP Security] in the Menu tree.
TABLE 9-22 lists the functions for configuring Log archiving for XSCF. Select
[Setting]-[Log Archives] in the Menu tree.
Select [Setting]-[Capacity on Demand] in the Menu tree for configuring COD. The
following functions are supported.
â– COD resource use status display and headroom configuration
■COD management information for each domain’s display and setting
â– COD hardware activation permit (COD permit) information display, and COD
hardware activation key (COD key) addition and deletion
TABLE 9-21 SNMP Configuration (Security Access)
Function Remarks
USM management information display and setting Displays and sets the USM management
information for SNMPv3.
This function is equivalent to the showsnmpusm(8)
and setsnmpusm(8) commands.
For details of the USM management, see
TABLE 2-21.
VACM management information display and
setting
Displays and sets the VACM management
information for SNMPv3.
This functions is equivalent to the
showsnmpvacm(8) and setsnmpvacm(8)
commands.
For detail of VACM management information, see
TABLE 2-21.
TABLE 9-22 Log Archiving Configuration
Function Remarks
Log archiving display and configuration Displays and sets the archiving host to save the
XSCF log information, enabling and disabling log
archiving, and the log capacity limits.
These functions are equivalent to the
showlogarchiving(8) and setlogarchiving(8)
commands.
Host public key setting Sets a public key used in server authentication for
the archive host.
This function is equivalent to the
setlogarchiving(8) command.
To Next Page
Loading...
Need help?
General